• <source id="kucmi"></source>
  • <sup id="kucmi"></sup>
    <sup id="kucmi"><center id="kucmi"></center></sup>
  • <tbody id="kucmi"><center id="kucmi"></center></tbody>
  • MP1100 Series 4kva to 10kva online UPS

    MP1100 Series 4kva to 10kva online UPS

    MP1100 series 4kva to 10kva online UPS uninterruptible power supply system is the new generation transformer based true online double conversion full digital controlled UPS.
    Type : MP1100 Series.
    Phase : single phase
    Power Factor : 0.9
    Input voltage : 200VAC
    Input frequency : 50/60Hz+/-10%

    MP1100 Series Brief introduction:

    MP1100 series 4kva to 10kva online UPS uninterruptible power supply system is the new generation transformer based true online double conversion full digital controlled UPS. This series UPS adopts high-speed microprocessor (MCU), Programmable logic device (CPLD) program which are controlled by software, the sixth generation low-exhaust and big-power IGBT and static switch as power components. This series product combines the world’s newest control spare parts and the most advanced software. It is designed to meet high availability and high power quality needs of a wide variety of critical applications

    MP1100 is widely used in telecom, bank, security, transporting, utility, manufacture, industry, commerce, government, medical equipment etc.

    MP1100 Series Main Features:

    • LED+LCD display, make the operation easier via LCD panel.

    • Low frequency true online double-conversion technology.

    • Wide input voltage range, compatible with different utilities.

    • Advanced digital circuit system design, increase the ups stability.

    • Advanced & Intelligent battery management, extend the battery life.

    • Intelligent inspection system, inspect all kinds of ups work status.

    • High precision SMD technique, improve the circuit reliability and running precision.

    • IGBT PWM inverter technology, provide the highest quality output power, efficiency is higher to 92%.

    • Static bypass operation, provide safe failure to mains if ups is overloaded or develops a fault.

    • Manual bypass operation, make the technical personnel work on faulty UPS, safe to change the inner units.256 real time event log with detailed parameters.

    • Standard RS232 & RS485, optional dry contacts or SNMP card for remote control.

    • Excellent load characters, Fulfill saltus from 0-100% without switching to bypass, safeguard stable output.Input & output voltage, battery charge &

    • discharge, temperature, short Circuit and overload etc. protections.

    • Can Choose UPS, ECO, or Inverter Work Mode.

    • Auto restart function.

    • Perfect generator compatibility.

    • Optional EPO function.

    • Optional battery detecting module.


    Power Watt3.2kW4.8kW6.4kW8kW
    Working PrincipleLow Freuqency  Transformer Based True On Line-Double Conversion
    PhaseSingle Phase
    Input Power Factor≧0.9 ( Plus Filter)
    Input Voltage Range220VAC (230VAC or 240VAC)±25% , 1P+N+PE   optional 110V(120V or 277V )
    Input Frequency Range50Hz±10% / 60Hz±10% (Selectable)
    Output Ripple<2%
    Soft Start0~100% 5sec
    Charging ModeConstant current, then constant voltage, and charge with temperature compensation                                                            
    Float Charging Voltage220VDC
    Equalized Charging Voltage227VDC
    Temp. Compensated Voltage-3mV/℃/cell
    Charging Current5-10A
    TypeVRLA/AGM/Gel, optional Lithium Battery
    Battery Capacity7~999AH settable ( Configurate Battery Capacity according to Back-up Time )
    Quantity16units 12V or 96units 2V batteries (Battery Voltage 192VDC)
    Temperature20oC~25oC (For Maximum Efficiency)
    PhaseSingle Phase
    Nominal Voltage220VAC (230VAC or 240VAC), 1P + N   optional 110V(120V or 277V )
    Output Voltage Regulated Accuracy±1 %( Stable load), ±3%( fluctuant load)
    Output Frequency Range50Hz 60Hz<±0.5% ( Asynchronous )
    Crest Factor> 3:1
    Output Total Harmonic Distortion (THD)Pure Sine Wave, Linear Load < 3%, Non-Linear Load<5%
    Dynamic CharacteristicsInstant voltage<±5% ( from 0 to100% ), Instant recover time<10ms
    Overload CapacityAt 115% load, normal work, At 125% load 10 min, At 150% load 1min, At 200% load 1S
    Inverter Efficiency>92% ( full load )
    PhaseSingle Phase ( P+N )
    Nominal Voltage220VAC (230VAC or 240VAC)   optional 110V(120V or 277V )
    Transfer Time0ms( adopt static switch )
    Input ProtectionInput voltage, frequency over limited protection
    Output ProtectionOver current, short circuit, over voltage, low voltage
    Battery ProtectionOver charge, over-discharge protection
    Temperature ProtectionEnvironment over temperature protection, inverter over temperature protection
    Hardware Fault ProtectionAssistant power abnormal, breaker cut off, breaker overload, power devices over current/over voltage etc. protection
    Working EnvironmentTemp: -10~40oC, relative humidity: 30%~90%, Altitude<2000m ( 1% decrease against 100 meters’ rise, Max. altitude 4000m )
    Communitation InterfaceRS232/ RS485, optional dry contact, SNMP card ( for remote control via internet )
    Parallel OperationTandem hot backup
    Auti-surge Capacity10/700μS, 5KV;  8/20μS, 20KA
    Protection LevelIP21
    Safety PerformanceVin-n Vout-n 2000Vac, creepage<10mA , insulating resistance>2MΩ(500VDC)
    Noise (dB)50~5555~60
    Dimension (W*D*H) mm220*520*640220*500*760
    Weight (Kg)59658492
    ※100V-110V-120V Version is available
    Baykee reserves the right to change or modify product design, construction, specifications or materials without prior notice and without incurring any obligation to make such changes and modifications on Baykee products previously or subsequently sold.